Sunkeeper SK-6 Solar Regulator

Sunkeeper SK-6 Solar Regulator
Morningstars SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller.
Suitable for up to an 80w solar panel. Morningstar's SunKeeper solar controller provides a low cost regulated output directly from the solar module to
maximize battery life in small solar power applications.

The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller

High Reliability

Rated to 70°C to operate in high temperatures at the solar module.
More reliable than controllers mounted inside the junction box. Uses
very low on-resistance power MOSFET’s. No need to re-rate.

Outdoor Rated

ETL approved for outdoor use without an additional enclosure. Rugged
IP65, UV resistant case. Epoxy encapsulated printed circuit board and
watertight connection to the module junction box.

Extensive Electronic Protections

Fully protected against reverse polarity, short circuit, overcurrent, lightning
and transient surges, high temperature and reverse current at night.

Longer Battery Life

Series PWM with 3 stage charging: bulk, PWM regulation and float.
Includes temperature compensation at the controller or alternatively at
the battery when using optional remote temperature sensor. Able to
charge a zero voltage battery.

Rated for Hazardous Locations

Specifically designed for solar power systems in the oil/gas industry.
Approved for use in Class 1, Division 2, Groups A,B,C,D.

More Information

Bi-color LED is easy to read from the ground when the solar module
is pole-mounted. Indicates solar charging, regulation, normal nighttime
operation and any controller or system faults.

Easy to Install

Fits standard half inch conduit knockout (PG 13.5, M20) in module
junction box. Quickly fastens with included locknut. Wires have fork
connectors for easy connection to solar module terminals.